Multiple ChoiceACI Management
Question 1. Refer to the exhibit. A network engineer must improve the configuration backup process and the configuration restore process. The current ACI solution is integrated with VMMs and third-y.. L4-L7 devices. The process requires that no additional information be re-entered when importing the configuration for a fully- functional state. Which configuration configures the port policy?
A. Enable the Global AES Encryption Setting.
B. Select the JSON data format to be used when exporting
C. Create target DNs for all tenants.
D. Configure a local snapshot.
Multiple ChoiceExternal Network Connectivity
Question 2. An engineer must allow multiple external networks to communicate with internal ACI subnets. Which action should the engineer take to assign the prefix to the class ID of the external Endpoint Group?
A. Enable the Export Route Control Subnet for the External Endpoint Group flag.
B. Enable an L30ut with Shared Route Control Subnet.
C. Configure subnets with the External Subnets for External EPG flag enabled.
D. Configure subnets with the Import Route Control Subnet flag enabled.
Multiple ChoiceACI Fabric Infrastructure
Question 3. Refer to exhibit. Refer to the exhibit. The Cisco ACI fabric has an egress L3Out from Leaf-101 and Leaf-102 to CORE-1. VLAN 102 is used to form the OSPF adjacency. The workloads must be migrated into EPG-101, and the static port binding is configured to Leaf-103 e1/1 with encap VLAN 101. An engineer completes the port binding and receives an MCP fault. Which action clears the fault?
A. Use VLAN 101 for OSPF adjacency on the egress L3Out.
B. Use VLAN 102 as the encap VLAN on the EPG-101 static port binding.
C. Add VLAN 102 to the VLAN pool that is used by the static port binding.
D. Prune VLAN 101 from the VLAN pool that is used by the egress L3Out.
Multiple ChoiceACI Fabric Infrastructure
Question 4. When a pre-provision immediacy is used, when is the policy downloaded to the Cisco ACI leaf switch?
A. The policy is downloaded and programmed in the hardware policy CAM when the change is implemented on the Cisco APIC.
B. The policy is programmed in the hardware policy CAM when the policy is downloaded in the leaf software.
C. The policy is programmed in the hardware policy CAM when the first packet is received through the data path.
D. The policy is downloaded to the associated leaf switch software when the ESXi host is attached to a DVS.
Multiple ChoiceACI Fabric Infrastructure
Question 5. Refer to the exhibit. An engineer is implementing a BPDU filter on external switch interfaces That face the Cisco ACI fabric to prevent excessive TCNs from impacting the fabric. Which Configuration must be applied on Cisco ACI to avoid a Layer 2 loop?
A. Apply an MSTP instance on Cisco ACI.
B. Configure MCP globally
C. implement BPDU Guard.
D. Enable STP on downlinks.