Question 2. A customer reports that the Chassis Management Controller fails to receive chassis information from Cisco UCS Manager. Which set of steps resolves the issue?
A. 1) Verify that the IOM firmware and Cisco UCS Manager are at different software levels
B. 2) Verify that at least two physical cables between the IOM and fabric interconnect function properly.
B. 1) Verify that the IOM firmware and Cisco UCS Manager are at the same software level.
C. 3) Check for runtime link down status
C. 1) Verify that the IOM firmware and Cisco UCS Manager are at the same software level.
D. 4) Reseat the affected IOM.
D. 1) Verify that the IOM firmware and Cisco UCS Manager are at different software levels.
F. 2) Verify that at least one physical cable between the IOM and fabric interconnect functions properly.
G. 3) Check for runtime link down status
H. 4) Reseat the affected IOM.
J. 2) Verify that at least two physical cables between the IOM and fabric interconnect function properly.
K. 3) Check for runtime link down status.
L. 4) Reseat the affected IOM.
N. 2) Verify that at least one physical cable between the IOM and fabric interconnect functions properly.
O. 3) Check for runtime link down status.
P. 4) Reseat the affected IOM.
Explanation is locked. Start the demo or unlock full access to review explanations inside the protected test engine.